The machine loads the profiles from the stock bar warehouse, cutting and unloading the piece, in complete autonomy and without operator assistance. The working direction is available according to the customer's needs, from left to right and vice versa. The software, developed entirely by Pertici, ensures better management of the work cycle and cutting lists, automatically interfacing with the main cutting list processing programs available on the market.
The automatic bar loading unit has a capacity of up to 10 bars with a maximum length of 6.6 m and is equipped with a bar presence detection device. Thanks to the arrangement of the belts, short pieces up to 400 mm can be loaded. The cutting unit with ø 600 mm blade (SC 65) and ø 500 mm blade (SC 55) performs cuts at three main angles, 45° – 90° – 135° (intermediate degrees as an option).
The profile is blocked during cutting by a special centering device which allows the blade rotation center to be positioned in the center of the profile section, so as to be able to automatically perform wedge cuts. The cutting unit is completely enclosed with a front door for free access to the cutting area for calibration, cleaning and maintenance purposes. In the rear part the center is equipped with a special system for evacuating waste and cutting chips. The automatic unloading unit places the cut pieces in a special storage bench equipped with a safety photocell with a capacity of 12 pieces.
